From 11:00 pm to 12:00 pm EST ( 8:00 pm to 9:00 pm PST ) on January 6th, the website will be under maintenance. We are sorry for the inconvenience. Please arrange your schedule properly.
Effect of TUDCA and Fluoxetine on chronic unpredictable stress (CUS)-induced increase in Iba-1 protein expression in mice hippocampus and prefrontal cortex.
Representative images showing the restoration effect of Harmine on CUS-induced decrease in hippocampal DCX protein expressions. The Fluoxetine administration (20 mg/kg) is used as a positive control, and all data are shown as mean±SEM.
Fluoxetine hydrochloride (LY 110140) blocks the downregulation of cell proliferation resulting from inescapable shock (IS) of hippocampal cell[1]. Fluoxetine increases the number of newborn cells in the dentate gyrus of the hippocampus of adult rat. Fluoxetine also increases the number of proliferating cells in the prelimbic cortex[2]. Fluoxetine accelerates the maturation of immature neurons. Fluoxetine enhances neurogenesis-dependent long-term potentiation (LTP) in the dentate gyrus[3]. Fluoxetine, but not citalopram, fluvoxamine, paroxetine and sertraline, increases norepinephrine and dopamine extracellular levels in prefrontal cortex. Fluoxetine produces robust and sustained increases in extracellular concentrations of norepinephrine and dopamine after acute systemic administration[4].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Fluoxetine hydrochloride Related Antibodies
In Vivo
Fluoxetine hydrochloride (LY 110140) treatment also reverses the deficit in escape latency observed in animals exposed to inescapable shock in adult male Sprague-Dawley rats[1]. Fluoxetine (5 mg/kg) alone increases cell proliferation in the dentate gyrus. Coadministration (fluoxetine 5 mg/kg + olanzapine) also significantly increases the number of BrdU-positive cells compared with the control group[2]. Fluoxetine combined with Olanzapine produces robust, sustained increases of extracellular levels of dopamine ([DA](ex)) and norepinephrine ([NE](ex)) up to 361% and 272% of the baseline, respectively, which are significantly greater than either drug alone[5].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Room temperature in continental US; may vary elsewhere.
Storage
4°C, sealed storage, away from moisture and light
*In solvent : -80°C, 1 year; -20°C, 6 months (sealed storage, away from moisture and light)
Solvent & Solubility
In Vitro:
DMSO : ≥ 25 mg/mL (72.30 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 8.33 mg/mL (24.09 mM; Need ultrasonic)
*"≥" means soluble, but saturation unknown.
Preparing Stock Solutions
ConcentrationSolventMass
1 mg
5 mg
10 mg
1 mM
2.8919 mL
14.4596 mL
28.9193 mL
5 mM
0.5784 mL
2.8919 mL
5.7839 mL
10 mM
0.2892 mL
1.4460 mL
2.8919 mL
View the Complete Stock Solution Preparation Table
*Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles. Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months (sealed storage, away from moisture and light). When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
*
Note: If you choose water as the stock solution, please dilute it to the working solution,
then filter and sterilize it with a 0.22 μm filter before use.
For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day. The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μLDMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Protocol 2
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.23 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μLDMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Protocol 3
Add each solvent one by one: 10% DMSO 90% Corn Oil
Solubility: ≥ 2.5 mg/mL (7.23 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Taking 1 mL working solution as an example, add 100 μLDMSO stock solution (25.0 mg/mL) to 900 μLCorn oil, and mix evenly.
For the following dissolution methods, please prepare the working solution directly.
It is recommended to prepare fresh solutions and use them promptly within a short period of time. The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution.
If precipitation or phase separation occurs during preparation,
heat and/or sonication can be used to aid dissolution.
Protocol 1
Add each solvent one by one: PBS
Solubility: 13 mg/mL (37.60 mM); Clear solution; Need ultrasonic
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
Dosage
mg/kg
Animal weight (per animal)
g
Dosing volume (per animal)
μL
Number of animals
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO+
%
+
%
Tween-80
+
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO,
. All of co-solvents are available by MedChemExpress (MCE).
, Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration:
mg/mL
Method for preparing stock solution:
mg
drug dissolved in
μL
DMSO (Stock solution concentration: mg/mL).
*In solvent : -80°C, 1 year; -20°C, 6 months (sealed storage, away from moisture and light)
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take
μL DMSO stock solution, add
μL .
μL , mix evenly, next add
μL Tween 80, mix evenly, then add
μL Saline.
Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution
If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Male Sprague-Dawley rats weighing 250-300 g are housed under a 12-hour light/12-hour dark cycle (lights on at 7:00 am, lights off at 7:00 pm) and at constant temperature (25°C) and humidity and allowed free access to food and water. For chronic drug treatments, rats are administered fluoxetine (5 mg/kg/day) or saline by intraperitoneal (IP) injection once daily and olanzapine or vehicle in the drinking water for 21 days (vehicle-treated control, fluoxetine, and olanzapine alone) plus the combination of fluoxetine and olanzapine. For combination treatment, olanzapine is chosen because fluoxetine is known to interfere with the metabolism of olanzapine and raise the blood levels by up to 4-6 times. Olanzapine is dissolved in hydrochloric acid (HCl), then adjusted back to pH 6 with 1 N sodium hydroxide to make the stock solution of 3 mg/mL concentration. The same amount of vehicle solution is added to the water for the control animals. Fluid intake is measured three times per week, and drinking bottles are replenwashed with fresh drug solution. There are no differences in fluid intake among the treatment groups. For subchronic treatment, drugs are administered exactly the same way but for a total period of 7 days.
MCE has not independently confirmed the accuracy of these methods. They are for reference only.
*Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles. Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months (sealed storage, away from moisture and light). When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
Optional Solvent
ConcentrationSolventMass
1 mg
5 mg
10 mg
25 mg
H2O / DMSO
1 mM
2.8919 mL
14.4596 mL
28.9193 mL
72.2982 mL
5 mM
0.5784 mL
2.8919 mL
5.7839 mL
14.4596 mL
10 mM
0.2892 mL
1.4460 mL
2.8919 mL
7.2298 mL
15 mM
0.1928 mL
0.9640 mL
1.9280 mL
4.8199 mL
20 mM
0.1446 mL
0.7230 mL
1.4460 mL
3.6149 mL
DMSO
25 mM
0.1157 mL
0.5784 mL
1.1568 mL
2.8919 mL
30 mM
0.0964 mL
0.4820 mL
0.9640 mL
2.4099 mL
40 mM
0.0723 mL
0.3615 mL
0.7230 mL
1.8075 mL
50 mM
0.0578 mL
0.2892 mL
0.5784 mL
1.4460 mL
60 mM
0.0482 mL
0.2410 mL
0.4820 mL
1.2050 mL
*
Note: If you choose water as the stock solution, please dilute it to the working solution,
then filter and sterilize it with a 0.22 μm filter before use.
Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.
Powered by Bioz
