1. Cell Cycle/DNA Damage PI3K/Akt/mTOR
  2. ATM/ATR
  3. Berzosertib

Berzosertib  (Synonyms: VE-822; VX-970; M6620)

Cat. No.: HY-13902 Purity: 99.70%
SDS COA Handling Instructions

Berzosertib (VE-822) is an ATR inhibitor with a Ki value of less than 0.2 nM. It also inhibits ATM with a Ki of 34 nM.

For research use only. We do not sell to patients.

Berzosertib Chemical Structure

Berzosertib Chemical Structure

CAS No. : 1232416-25-9

Size Price Stock Quantity
Free Sample (0.1 - 0.5 mg)   Apply Now  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 92 In-stock
Solution
10 mM * 1 mL in DMSO USD 92 In-stock
Solid
5 mg USD 84 In-stock
10 mg USD 114 In-stock
50 mg USD 288 In-stock
100 mg USD 460 In-stock
200 mg USD 670 In-stock
500 mg   Get quote  
1 g   Get quote  

* Please select Quantity before adding items.

This product is a controlled substance and not for sale in your territory.

Customer Review

Based on 15 publication(s) in Google Scholar

Top Publications Citing Use of Products

    Berzosertib purchased from MedChemExpress. Usage Cited in: Eur J Med Chem. 2017 Feb 15;127:691-702.  [Abstract]

    Relative cell viability (%) in MDCK CAIX- and CAIX+ cells exposed to ATR inhibitors (VE-821 and VE-822) or the CAIXi conjugated derivatives in combination with radiation during normoxia (21% O2) and anoxia (≤0.02% O2). Normoxic cells are irradiated with 2 Gy and anoxic cells with 4 Gy to induce similar effects on cell viability.

    View All ATM/ATR Isoform Specific Products:

    • Biological Activity

    • Protocol

    • Purity & Documentation

    • References

    • Customer Review

    Description

    Berzosertib (VE-822) is an ATR inhibitor with a Ki value of less than 0.2 nM. It also inhibits ATM with a Ki of 34 nM.

    IC50 & Target[1]

    ATR

    0.2 nM (Ki)

    ATM

    34 nM (Ki)

    PI3Kγ

    220 nM (Ki)

    In Vitro

    Berzosertib (VE-822) also inhibits DNK-PA, mTOR, PI3Kγ with IC50 of >4, >1, and 0.22 μM, respectively. In PSN-1 and MiaPaCa-2 cells, Berzosertib (VE-822) inhibits ATR and ATM with IC50 of 19 nM and 2.6 μM, respectively. VE-822 (80 nM) reduces phospho-Ser345-Chk1 after NSC 613327 (100 nM), radiation (XRT) (6 Gy) or both in PDAC. Additionally, Berzosertib (VE-822) does not inhibit ATM, Chk2 or DNA-PK phosphorylation in response to radiation, which further supports the selectivity of Berzosertib (VE-822) for ATR. VE-822 decreases survival of irradiated PDAC (all lines used are p53-mutant; K-Ras mutant). Knock down of Chk1 by siRNA sensitizes PSN-1 and MiaPaCa-2 cells to radiation but the radiosensitising effect is less profound compare with Berzosertib (VE-822). Adding Berzosertib (VE-822) to NSC 613327 reduces survival ~2-3-fold and dramatically more after chemoradiotherapy[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    In Vivo

    PSN-1 xenografts are treated with Berzosertib (VE-822) (60 mk/kg; d0, 1), NSC 613327 (100 mg/kg; d0) and/or XRT (6 Gy; d1). Tumors are then harvested 2 h post-XRT. Berzosertib (VE-822) inhibits p-Ser-345-Chk1 in xenografts after DNA-damaging agents, establishing VE-822 as a potent inhibitor of ATR in vivo. Besides, Berzosertib (VE-822) enhances the therapeutic efficacy of radiation (XRT) in MiaPaCa-2 and PSN-1 xenograft models[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Molecular Weight

    463.55

    Formula

    C24H25N5O3S

    CAS No.
    Appearance

    Solid

    Color

    Light yellow to yellow

    SMILES

    NC1=NC=C(C2=CC=C(S(=O)(C(C)C)=O)C=C2)N=C1C3=CC(C4=CC=C(CNC)C=C4)=NO3

    Shipping

    Room temperature in continental US; may vary elsewhere.

    Storage
    Powder -20°C 3 years
    4°C 2 years
    In solvent -80°C 6 months
    -20°C 1 month
    Solvent & Solubility
    In Vitro: 

    DMSO : ≥ 35 mg/mL (75.50 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    *"≥" means soluble, but saturation unknown.

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.1573 mL 10.7863 mL 21.5726 mL
    5 mM 0.4315 mL 2.1573 mL 4.3145 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    In Vivo:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.5 mg/mL (5.39 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 2.5 mg/mL (5.39 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

    For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% Vitamin E-TPGS in Saline

      Solubility: 9.38 mg/mL (20.24 mM); Suspended solution; Need ultrasonic

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    Purity & Documentation

    Purity: 99.70%

    References
    Cell Assay
    [1]

    NSC 613327 (10 nM) is added 24 h pre-XRT and is replaced with fresh medium before addition of Berzosertib (VE-822). PSN-1 cells are treated with Berzosertib (VE-822) (80 nM) for 1 h before, through to 18 h after, XRT (6 Gy). Apoptosis is analyzed 48 h after XRT by flow cytometry using an Annexin V-FITC kit with PI[1].

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    Animal Administration
    [1]

    Mice[1]
    MiaPaCa-2 cells and PSN-1 cells (106 in 50 μL serum-free medium mixed with 50 μL of Matrigel) are inoculated subcutaneously in female Balb/c nude mice. When the xenograft tumors reach 80 mm3, the mice are randomized. Berzosertib (VE-822) (60 mg/kg) is administered by oral gavage on one of three alternate schedules; either daily on days 0-5 (total of six days dosing), daily on days 0 through to 3 (total of 4 days dosing) or on days 1, 3 and 5. XRT (6 Gy) is given either on days 0 or 1 or days 1-5 (total of 5 days dosing; 2 Gy). NSC 613327 is dosed at 100 mg/kg by intraperitoneal injection on day 0. XRT to the tumor is given 2 h after initiation of Berzosertib (VE-822) treatment.

    MCE has not independently confirmed the accuracy of these methods. They are for reference only.

    References

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 2.1573 mL 10.7863 mL 21.5726 mL 53.9316 mL
    5 mM 0.4315 mL 2.1573 mL 4.3145 mL 10.7863 mL
    10 mM 0.2157 mL 1.0786 mL 2.1573 mL 5.3932 mL
    15 mM 0.1438 mL 0.7191 mL 1.4382 mL 3.5954 mL
    20 mM 0.1079 mL 0.5393 mL 1.0786 mL 2.6966 mL
    25 mM 0.0863 mL 0.4315 mL 0.8629 mL 2.1573 mL
    30 mM 0.0719 mL 0.3595 mL 0.7191 mL 1.7977 mL
    40 mM 0.0539 mL 0.2697 mL 0.5393 mL 1.3483 mL
    50 mM 0.0431 mL 0.2157 mL 0.4315 mL 1.0786 mL
    60 mM 0.0360 mL 0.1798 mL 0.3595 mL 0.8989 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    Your Recently Viewed Products:

    Inquiry Online

    Your information is safe with us. * Required Fields.

    Product Name

     

    Salutation

    Applicant Name *

     

    Email Address *

    Phone Number *

     

    Organization Name *

    Department *

     

    Requested quantity *

    Country or Region *

         

    Remarks

    Bulk Inquiry

    Inquiry Information

    Product Name:
    Berzosertib
    Cat. No.:
    HY-13902
    Quantity:
    MCE Japan Authorized Agent: